ANNEX 8: MODEL CONTROL

Scope of annex
This annex covers frequency bands and regulatory as well as informative parameters recommended for the application of model control equipment, which is solely for the purpose of controlling the movement of the model, in the air, on land or over or under the water surface. Although the bands are not harmonised, the parameters given in the table are common in a majority of CEPT countries. It should be noted that the bands are not exclusive for this type of application.

Frequency Band Power / Magnetic Field Spectrum access and mitigation requirements Modulation / maximum occupied bandwidth ECC/ERC Deliverable Notes
a1 26990kHz  -  27000kHz
100 mW e.r.p No requirement 10 kHz
a2 27040kHz  -  27050kHz
100 mW e.r.p No requirement 10 kHz
a3 27090kHz  -  27100kHz
100 mW e.r.p No requirement 10 kHz
a4 27140kHz  -  27150kHz
100 mW e.r.p No requirement 10 kHz
a5 27190kHz  -  27200kHz
100 mW e.r.p No requirement 10 kHz
b 34.995MHz  -  35.225MHz
100 mW e.r.p No requirement 10 kHz ERC/DEC/(01)11 Only for flying models
c1 40.66MHz  -  40.67MHz
100 mW e.r.p No requirement 10 kHz ERC/DEC/(01)12
c2 40.67MHz  -  40.68MHz
100 mW e.r.p No requirement 10 kHz ERC/DEC/(01)12
c3 40.68MHz  -  40.69MHz
100 mW e.r.p No requirement 10 kHz ERC/DEC/(01)12
c4 40.69MHz  -  40.7MHz
100 mW e.r.p No requirement 10 kHz ERC/DEC/(01)12


Additional Information

Harmonised Standards
EN 300 220 all sub-bands

Technical parameters also referred to in the harmonised standard
No information

Frequency issues
No information